Used54 Yanmar 4066M Compact Utility Tractor
RDO Equipment·Left-hand side, QLD
3 photos supplied by RDO Equipment and displayed from their website. See the original listing →
About this tractor
RDO Equipment has this 4 Yanmar 4066M Gear 4WD / HST 4WD (Model year 2023) available at Left-hand side, QLD. Built in 4, it is an older tractor at 2022 years, which is reflected in the asking price.
RDO Equipment has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on RDO Equipment's website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Year | 4 |
| Make | Yanmar |
| Model | 4066M Gear 4WD / HST 4WD (Model year 2023) |
| Condition | Used |
| Specifications: Model | 4066M Gear 4WD / HST 4WD (Model year 2023) |
| Key Specs Engine power (gross) | 48.5 kW 65.9 hp PS at 2600 rpm SAE J1995 rated power |
| PTO power - Gear transmission | Gear - 40.2 kW 54 hp Hydrostatic transmission (HST) - 38.7 kW 52 hp Per SAE J1995 |
| Steering hydraulics | 21.5 L/min 5.7 gpm |
| Implement hydraulics | 38.7 L/min 10.2 gpm |
| Hitch type | Category 1 |
| Standard transmission; forward/reverse | 12/12 PowrReverser transmission (PRT) |
| Cruise control | Optional |
| Wheelbase | 185.5 cm 73 in. |
| Engine Type | Diesel |
| Air cleaner | Dual element |
| Lubrication | Pressurized |
| Fuel tank capacity | Rollover protective structure (ROPS) - 49.2 L 13 U.S. gal. Cab - 50 L 13.8 U.S. gal. |
| Manufacturer | Yanmar |
| Engine model | 4TNV86CHT-MJT |
| Engine power (gross) | 48.5 kW 65.9 hp PS at 2600 rpm SAE J1995 rated power |
| Rated engine speed | 2600 rpm |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Turbocharged and charge air cooled |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 4 / 2.091 L 4 / 127.6 cu in. |
| Number of cylinders | Four |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 86 x 90 mm 3.4 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Cooling system | Liquid |
| Engine torque @ rated speed | 178 Nm 131.3 lb-ft |
| Operating range | 950-2750 rpm |
| Engine shutoff | Key switch |
| Family | EYDXL2.09HDA or FYDXL2.09HDA |
| Fuel system Type | High pressure common rail direct injection |
| Power take-off (PTO) Standard | Rear - 540 rpm at 2600 rpm |
| Control | Independent |
| Clutch | Wet disc |
| Left-hand reverser | Yes |
| Final drive | Planetary |
| Brakes | Multi-plate wet disc |
| Steering | 21.5 L/min 5.7 gpm |
| Direction reverser; forward/reverse | Yes |
| Differential lock | Yes |
| On-the-go shifting | Yes |
| Clutch, wet/dry | Wet |
| Clutch disk diameter wet clutch | 129 mm 5.08 in. |
| Optional transmission; forward/reverse | 3/3 Hydrostatic transmission (HST) |
| Axle capacity | Mechanical front-wheel drive (MFWD) - 1.6 kg 5.9 lb |
| Front | 1600 kg 3528 lb |
| Rear | Farm - 14.9-24 Turf - 44x18-20 or 22.5LL-16.1 R4 - 17.5Lx24 |
| Electrical Battery size | 770 CCA |
| Alternator (12-V) | 75 amp |
| Starter size | 2 kW 2.68 hp |
| Type | Fixed |
| Hydraulics Type | Open center |
| Pump rated output | 60.2 L/min 15.9 gpm |
| Implement | 38.7 L/min 10.2 gpm |
| Pump type | Dual gear |
| Draft control type | Position control |
| Remote control valves available | Three remotes optional |
| 3-point hitch Type | Category 1 |
| Lift capacity at lift link ends | 1420 kg 3130 lb |
| Fluid capacities Crankcase with filter | 5.3 L 1.4 qt |
| Transmission and hydraulic system, gear | 44 L 12 gal. |
| Final drive Type | Planetary |
| Platform - Flat/straddle | Flat |
| Gear shift location - Console/floor | Left-hand side |
| MFWD dimensions Wheelbase | 185.5 cm 73 in. |
| Front axle clearance | 395 mm 15.6 in. |
| Turning radius without brakes | 3.0 m 9.84 ft |
| Unballasted operating weight | OOS - 1710 kg 3770 lb Cab - 2120 kg 4675 lb |
| Turning radius with brakes | 2.8 m 9.19 ft |
| Standard tires Front | Farm - 8-16 Turf - 27x10.5-15 R4 - 10-16.5 |
| Front tread range | 148.1 cm 58.3 in. |
| Rear tread spacing | 137.2 cm 54 in. |
| Miscellaneous Underhood muffler | Yes |
| Joystick SCV control | Yes |
| Inboard planetary | Yes |
| Location | Left-hand side, QLD |
| Category | Tractors |
Driven by a turbocharged diesel engine and planetary gears, the 4066M gives you the power and control of a large tractor in a compact body. Full description on the dealer's site →
Similar tractors
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.