Used124 Yanmar® John Deere Compact Utility Tractor - Emmetts Staying Power

About this tractor
A 4 Yanmar® Number of cylinders offered by Emmetts in Left-hand side, VIC. Built in 4, it is an older tractor at 2022 years, which is reflected in the asking price.
Emmetts has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on Emmetts' website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Year | 4 |
| Make | Yanmar® |
| Model | Number of cylinders |
| Condition | Used |
| Model | Number of cylinders |
| 2025R | 3 |
| Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm |
| Power take-off (PTO) power | 12.8 kW 17.2 hp |
| Steering hydraulics | 13.4 L/min 3.5 gpm |
| Implement hydraulics | 13.4 L/min 3.5 gpm |
| Hitch type | Limited Category 1 |
| Lift capacity, 24-in. behind link arms | 415 kg 915 lb |
| Standard transmission; forward/reverse | Hydrostatic - two range |
| Cruise control | Standard |
| Wheelbase | 1600 mm 63 in. |
| Family Manufacturer | Yanmar® |
| Engine model | 3TNV80F-NCJT |
| Rated engine speed | 3200 rpm |
| Type | Limited Category 1 |
| Injection pump type | Indirect injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | Three cylinders: 1.267 L 77 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 80 x 84 mm 3.2 x 3.3 in. |
| Compression ratio | 23.1:01 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 53.1 Nm 39.1 lb-ft |
| Fuel tank capacity | 20.4 L 5.39 gal. |
| Battery size | 500 CCA |
| Alternator (12-V) | 40 amp |
| Starter size | 1.2 kW 1.6 hp |
| Transmission gear ranges Final drive | Spur gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Creeper | No |
| Differential lock | Yes |
| Pump rated output | Steering 13.25 L/min 3.5 gpm Implement 13.25 L/min 3.5 gpm 26.5 L/min 7.0 gpm |
| Pump type | Gear |
| Maximum operating pressure | 137 bar 1987 psi |
| Draft control sensing | Position control |
| Remote control valves available | Two |
| Standard | Rear - 540 rpm Mid - 2100 rpm |
| Optional Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Rollover protective structure | Type Foldable OSHA, SAE, ASAE |
| Platform - flat/straddle | Three-piece semi flat |
| Gear shift location - console/floor | Left-hand side |
| Limited slip differential | No |
| Front | R3 Turf: 23x8.50-12 R3 Radial: 220/55-R12 R4 Industrial: 23x8.50-12 |
| Rear | R3 Turf: 12-16.5 R3 Radial: 280/70 R16 R4 Industrial: 12-16.5 |
| Tilt steering wheel | Yes |
| 12-V Outlet | Yes |
| Location | Left-hand side, VIC |
| Category | Tractors |
John Deere Compact Utility Tractor - Emmetts Staying Power Full description on the dealer's site →
Similar tractors
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.







