Used124 Yanmar® John Deere Compact Utility Tractor - Emmetts Staying Power

About this tractor
A 4 Yanmar® Number of cylinders offered by Emmetts in VIC. Built in 4, it is an older tractor at 2022 years, which is reflected in the asking price.
Emmetts has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on Emmetts' website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Year | 4 |
| Make | Yanmar® |
| Model | Number of cylinders |
| Condition | Used |
| Model | Number of cylinders |
| 3039R | 3 |
| 3046R | 3 |
| Engine power (gross) | SAE J1995 rated power: 33.3 kW 44.7 hp 45.3 PS at 2600 rpm |
| Power take-off (PTO) power | 25.2 kW 33.9 hp |
| Steering hydraulics | 23.5 L/min 6.2 gpm |
| Implement hydraulics | 34.3 L/min 9.1 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 995 kg 2194 lb |
| Standard transmission; forward/reverse | eHydro transmission |
| Cruise control | Standard |
| Wheelbase | 1727 mm 68 in. |
| Family Manufacturer | Yanmar® |
| Engine model | 3TNV86CHT-MJTV |
| Rated engine speed | 2600 rpm |
| Type | Spur gear |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Turbocharged and intercooled |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | Three cylinders: 1.57 L 95.7 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 86 x 90 mm 3.4 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Liquid |
| Air cleaner | Dual element |
| Engine torque at rated speed | 112.3 Nm 90 lb-ft |
| Fuel tank capacity | OOS: 37.4 L 10 U.S. gal. Cab only: 47.6 L 12.6 U.S. gal. |
| Battery size | 500 CCA |
| Alternator (12-V) | 75 amp |
| Starter size | 1.4 kW 1.9 hp |
| Final drive | Spur gear |
| Brakes | Wet disk |
| Steering | Hydrostatic power steering |
| Creeper Cruise control | Standard |
| Pump rated output | Steering 23.5 L/min 6.2 gpm Implement 34.3 L/min 9.1 gpm 57.8 L/min 15.3 gpm |
| Pump type | Single gear |
| Maximum operating pressure | 172 bar 2495 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to six rear remotes |
| Standard | Independent rear: 540 rpm |
| Optional | Mid: 2100 rpm |
| Control | Lever and switch |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Transmission and hydraulic system | 26.5 L 7 U.S. gal. |
| Platform - flat/straddle | One-piece semi flat |
| Visibility | 360 degree (angle) |
| Noise rating | 80 dBA |
| Seat equipment | Scissor-link |
| Height Wheelbase | 1727 mm 68 in. |
| Front axle clearance | Minimum: 171 mm 6.7 in. Maximum: 299 mm 11.8 in. |
| Turning radius with brakes | 2.7 m 8.8 ft |
| Turning radius without brakes | 2.8 m 9.2 ft |
| Front tread range | 1117 mm 44 in. |
| Rear tread spacing | 1031 mm 40.6 in. |
| Location | VIC |
| Category | Tractors |
John Deere Compact Utility Tractor - Emmetts Staying Power Full description on the dealer's site →
Similar tractors
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.







