UsedJohn Deere 5075GL - Emmetts Staying Power
Emmetts·VIC
12 photos supplied by Emmetts and displayed from their website. See the original listing →
About this wheel loader
A John Deere 5075GL - Emmetts Staying Power offered by Emmetts in VIC.
As listed, it has a 24/24 MFWD transmission with mechanical hi-lo transmission.
Emmetts has not published a price for this wheel loader — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on Emmetts' website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Make | John |
| Model | Deere 5075GL - Emmetts Staying Power |
| Condition | Used |
| 1 | Maximum PTO power |
| 2 | Engine rpm at maximum power |
| 3 | Constant power range |
| 4 | Torque reserve |
| 5 | Engine rpm at maximum torque |
| 6 | BSFC at rated speed |
| 3341 | Four EH SCVs |
| 3820 | Mechanical actuation 540 / 540E rpm |
| 3821 | Mechanical actuation 540 / 1000 rpm |
| 3822 | Mechanical actuation 540 / 540E rpm |
| 3823 | Mechanical actuation 540 / 1000 rpm |
| 3824 | Electrohydraulic actuation 540 / 540E rpm |
| 3825 | Electrohydraulic actuation 540 / 1000 rpm |
| 3826 | Electrohydraulic actuation 540 / 540E rpm |
| 3827 | Electrohydraulic actuation 540 / 1000 rpm |
| 4012 | Mechanical rockshaft |
| 4031 | Electronic rockshaft |
| 8459 | Comfort implement control |
| 8460 | Comfort implement control |
| Feature overview | 5GF |
| Cab/open operator station (OOS) | Available |
| Height to hood (A) | 1269 mm (50 in.) |
| Height to operator’s seat (B) | 953 mm (37.5 in.) |
| Height to rear fender (C) | 1089 mm (42.9 in.) |
| Tyre sizes | 5075GL |
| Front axle tyre sizes | 280/70 R16 |
| Rear axle tyre sizes | 360/70 R24 |
| Height to rear fender (B) | 1160.9 mm (45.7 in.) |
| Height to operator’s seat (C) | 988 mm (38.9 in.) |
| Code | Description |
| Engine overview | 5GF |
| PTO test measurements | John Deere 5100GF |
| Constant power range (rpm) | 400 |
| PTO torque reserve (percentage) | 41,5 |
| Fuel consumption (g/kW/h) | 288,9 |
| Rated Engine hp (kW) at 2200 rpm | 100 (74) |
| PTO hp (kW) | 81,8 (61) |
| Power losses hp (percentage) | 18,2 (18,2 percent) |
| Legend axis X | Fuel rate [kg/h] / power [kW] |
| Y | Score SAE 753 |
| Z | Brake specific fuel consumption (BSFC) [g/kWh] / PTO torque [Nm] |
| Legend lines | Power |
| Legend values | Values |
| Steering and transmission (L/min) | 24.9 L/min (6.58 gal./min) |
| Second pump - SCV and hitch (L/min) | 56.5 (14.93 gal./min) |
| Third pump - SCV and hitch (L/min) | 26 (6.87 gal./min) |
| Total hydraulic flow (L/min) | 107,4 L/min (28.37 gal./min) |
| Maximum flow rate | No load |
| 5100GF | 58 L/min (15.3 gal./min) |
| Axis legend X | SCV outlet [Bar] |
| A | Floating adjustment |
| Blocking adjustment B | Left-hand side adjustment |
| Right-hand side adjustment C | Retract the hydraulic cylinder |
| Axis legend | Value 5GF |
| Rated power (97/68EC) | 55.9 kW (75 hp) |
| Transmission | 24/24 MFWD transmission with mechanical Hi-Lo |
| Hydraulics | Up to three mechanical SCVs |
| Location | VIC |
| Category | Loaders |
John Deere 5075GL - Emmetts Staying Power Full description on the dealer's site →
Similar loaders
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.